Engineering Equipment India Manufacturers & Exporters

ACHIEVEMENTS

.

- Deaerators to Sharjah Electricity and Water Authority (SEWA), Sharjah, UAE, with specification: 595 TPH and 182 degrees Celsius outlet temperature.
- Shell and Tube Heat Exchangers (STHE) with heat duty values ranging from 6,500 kcal/hr to 45,90,500 kcal/hr.
- Steam Coil Air Preheaters (SCAPH) having heating values from 15,500 kcal/hr to 35,45,900 kcal/hr.
- Over 15,000 silencers to our domestic and international clients, with specification: maximum pressure of 140 kg/cm2 and 120 TPH of steam flow.
- Flue Gas Desulphurisation (FGD) system in Jeddah, Saudi Arabia
- Over 350 chimneys to companies in India and abroad, including self supported stainless steel chimney with a height of 30 m, for 3X 2000 kVA and 1X1500 kVA DG sets.
- Air receivers up to a volume of 35 m3 and a pressure of 20 kg/cm2 (g).
- More than 150 blowdown vessels to our national and international customers.
- 35 reboilers so far, of various capacities.
- Several knockout drums for our national and international customers. The maximum efficiency achieved by the EEI knockout drum and mist eliminator configuration is 99.96 %.
- Over 2500 sample cooler
- Storage bullets (horizontal) up to 40 tonnes and a pressure of 40 kg/cm2 (g).
- Screw conveyors up to the following specifications: 25 meters long, 20 degrees inclination, with 8500 kg/hr of powder handling capability.
- Flare stacks, to various process industries, with high combustion efficiencies to achieve and comply with the norms specified by the pollution control board.
- More than 550 soot blowers to our national and international clients.
- Tray driers, from 300 kg per batch to 2990 kg per batch, using food grade stainless steel material, for various pharmaceutical, chemical and process industries.
- Vacuum driers at rotating speeds of 12 rpm to 45 rpm, for an operating condition up to -720 mm wc, and at temperatures ranging from 130 degrees Celsius to 170 degrees Celsius.
- Blenders with capacities up to 2000 kg/hr.

contact@ee2i.com

Product Catalogue

OUR PRODUCTS & SERVICES

Boiler Deaerator systems

Our range includes Horizontal Deaerator tanks, Vertical Deaerator towers and Spray cum Tray type Deaerators.

Pressure Vessels

Pressure vessels designed and manufactured includes Compressed Air receiver Tanks, Knockout Drums, Re-Boilers, Blowdown Tanks, Flash Vessels, Reactor Vessels, Industrial Fermenters, Crystallizers, Sample Coolers

Heat Exchangers

EEI has designed manufactured and supplied various Shell and Tube Heat Exchangers, Plate Heat exchangers, Air Heat Exchangers for both cooling and heating processes.

Dampers

Over 3500 Dampers, Guillotines and Louvers to national and international clients for various applications in Boilers, HVAC, Pollution control

Soot Blowers

EEI’s Soot blower range includes Long Retractable Soot Blowers, Wall De-slaggers/ Short Retractable Soot Blower, Rotary Motorised Soot Blower, Rake type Soot Blower

Economiser

EEI has manufactured pressurized economizer, non-pressurized economizer, steaming economizer, non-steaming economizer, condensing economizer or non-condensing economizer depending on the required water temperature. Types of Economiser includes Plain Tube Economiser, Extended surface Economisers

Pollution Control Equipment

EEI specializes in the design and manufacture of Flue Gas Desulphurisation System (FGD) and various air and noise pollution control equipment which includes Industrial Silencers, Dust Collectors, Flare Stack, Self supported Chimney

Sample Coolers

EEI has designed, manufactured and supplied over 2600 sample cooler units. The sample cooler is a low pressure..

Storage Tanks and Bullets

EEI has designed, manufactured and supplied gas storage bullets (horizontal) up to 40 tonnes and a pressure of 40 kg/cm2 (g) and above the ground tanks to store HSD, HFO and LDO, LSHS, and other petroleum products, acids, chemicals.

Industrial Dryers

EEI’s manufacturing range of Industrial dryers includes Tray Dryers, Fluidized bed Dryers, Vacuum rotary Dryers, Convection Dryers, Spray Dryers and dryers are used to reduce moisture level in large quantities of bulk materials.

Incinerators

EEI’s manufacturing range of Incinerators include Solid waste Incinerators, Exhaust gas Incinerators, Liquid waste Incinerators. Incineration is a waste treatment process which includes the combustion of waste for recovering energy.

Screw Conveyor

Screw conveyors are also known as spiral and worm conveyors. Screw conveyors are used to transport materials along a plane.

Boiler Consultancy Services

EEI has over 50 years experienced engineers and technocrats in boilers. This experience is our asset.

Burner Management System

The Burner management system is designed to perform the safety of the boiler i.e. protection and interlocking as well. EEI designed and manufactured Burner Management system ensures safe operation and protection of combustion equipment.

Duct and Expansion Bellows

Duct and expansion bellows are designed, manufactured and supplied for high temperatures and pressure and our range of Joints and Bellows includes Metallic Expansion Joints, Non Metallic Expansion Bellows, Rubber Expansion Joints, Single Bellows, Multiple Bellows, Double Bellows, Rectangular Bellows and Circular Bellows

Industrial Blenders

EEI has designed, manufactured and supplied blenders with capacities up to 2000 kg/hr. Our range of Blenders includes Ribbon Blender, Plough Shear Blender and Double Helical Ribbon Blades

Industrial Fans and Blowers

High efficiency industrial forced draft fans, induced draft fans are designed manufactured and supplied for various boiler and process industries

Instrumentation and Piping System

Instrumentation & piping system which includes instrumentation and control system, Oil & Gas handling system, HP and LP Dosing systems, pressure reducing station are integral part of power & process plants.